Loading ...
Loading ...
Loading ...
sing the brake pedal repeatedly will toggle
the feature ON or OFF each time.
7. To exit the re mote tra nsmitter and
feature programming mode, turn the igni-
tion switch to the “LOCK ” position, remove
the key from the ignition switch and test
operation of the remote transmitter(s) and
horn confirmation feature.
& System maintenance
! Changing the batteries
The two 3-volt lithium batteries (model
CR-1220) supplied in your remote engine
start transmitter should last approximately
three years, depending on usage. When
the batteries begin to weaken, you will
notice a decrease in range (distance from
the vehicle that your remote engine start
system operates). Follow the instructions
below to change the re mote control
batteries.
1. Carefully pry the remote engine start
transmitter halves apart using a small flat-
head screwdriver.
2. Remove the circuit board from the
bottom half of the case and slide the white
plastic battery holder out from under the
battery tab releasing the batteries. Re-
move the old batteries and replace with
new ones. Be sure to observe the (+) sign
Starting and operating 7-11
– CONTINUED –
Loading ...
Loading ...
Loading ...