Loading ...
Loading ...
Loading ...
5. Remove the steel winged washer nut
securing the spare tire by turning it
counterclockwise.
6. Remove the spare tire from the spare tire
compartment.
7. Remove plastic wing nut and jack and
lug wrench assembly. Detach lug wrench
from jack by turning the jack hex nut
drive screw counterclockwise.
E224481
8. If your vehicle has a wheel trim, use the
tool supplied to remove it and access the
lug nuts.
9. Loosen each wheel lug nut one-half turn
counterclockwise, but do not remove
them until the wheel is raised off the
ground.
E145908
10. The vehicle jacking points are shown
above, and are depicted on the yellow
warning label on the jack.
E201100
11. Position the jack so that the vehicle
downward flange rests in the jack
saddle flange as shown above. Raise
the vehicle by using the lug wrench to
turn the jack nut clockwise. Once the
flat tire is raised above the ground,
remove the lug nuts with the lug
wrench.
12. Replace the flat tire with the spare tire,
making sure the valve stem is facing
outward. Reinstall the lug nuts until the
wheel is snug against the hub. Do not
fully tighten the lug nuts until the wheel
has been lowered.
13. Lower the wheel by turning the jack
handle counterclockwise.
363
Continental (CPL) Canada/United States of America, enUSA, First Printing
Wheels and Tires
Loading ...
Loading ...
Loading ...