User Manual Ford 2020 F-150 Raptor Car

• Owner's manual - (English)

User care Ford 2020 F-150 Raptor Car

Table of contents

• Introduction
• About This Manual
• Symbols Glossary
• Data Recording
• California Proposition 65
• Perchlorate
• Ford Credit
• Replacement Parts Recommendation
• Special Notices
• Mobile Communications Equipment
• Export Unique Options
• Environment
• Protecting the Environment
• At a Glance
• Instrument Panel Overview
• Child Safety
• General Information
• Installing Child Restraints
• Booster Seats
• Child Restraint Positioning
• Child Safety Locks
• Seatbelts
• Principle of Operation
• Fastening the Seatbelts
• Seatbelt Height Adjustment
• Seatbelt Warning Lamp and Indicator
• Chime
• Seatbelt Reminder
• Child Restraint and Seatbelt
• Maintenance
• Seatbelt Extension
• Personal Safety SystemTM
• Personal Safety SystemTM
• Supplementary Restraints System
• Principle of Operation
• Driver and Passenger Airbags
• Front Passenger Sensing System
• Side Airbags
• Safety CanopyTM
• Crash Sensors and Airbag Indicator
• Airbag Disposal
• Keys and Remote Controls
• General Information on Radio
• Frequencies
• Remote Control
• Replacing a Lost Key or Remote Control

End of Travel Position

The steering column sets a stopping position just short of the end of the column position to prevent damage to the steering column. A new stopping position sets if the steering column encounters an object when tilting or telescoping.

To reset the steering column to its normal stopping position:

1. Confirm there is nothing obstructing the motion of the steering column.
2. Press and hold the steering column control until the steering column stops moving.
3. Press the steering column control again.
   • Note: The steering column may begin to move again.
4. When the steering column stops, continue holding the control for a few seconds.
5. Repeat for each direction as necessary.
6. A new stopping position sets. The next time you tilt or telescope the steering column, it stops just short of the end of the column position.

Hilly Condition Usage

Select a lower gear when the system is active in situations such as prolonged downhill driving on steep grades, for example in mountainous areas. The system needs additional engine braking in these situations to reduce the load on the vehicle’s regular brake system to prevent it from overheating.

Note: An audible alarm sounds and the system shuts down if it applies brakes for an extended period of time. This allows the brakes to cool. The system functions normally again after the brakes cool.