Loading ...
Loading ...
Loading ...
17
Washing Programs
Close the lid Finish Caution & Note
START
PAUSE
• The pulsator rotates for
8 seconds to detect the
laundry load.
• Then the WATER LEVEL
and the amount of
Detergent to be used
will be shown and
water will be supplied.
• Water Water level
will then be topped
up until the correct
wash has
the water the laundry
has absorbed.
• When the wash
program ends, the
chime will sound
for 10 seconds
before the Power
goes off
automatically.
• The WATER LEVEL will be set to a
higher level automatically if water is
already in the tub,or wet laundry is
loaded into the tub before starting.
• With lightweight bulky loads, a low
WATER LEVEL will be automatically
selected
• Changes to Water Temperature
(HOT/COLD) and wash level are
possible during operation.
(refer to page 14)
3
5
6
7
6
7
6
4
4
7
6
4
• When setting the WATER LEVEL
Manually,do not set to medium or lower to
prevent damage to the load.
• Washing with HOT water may damage the
load (Water is set to cold automatically).
Ensure that the load is under 2kg.
• In order to avoid and reduce wrinkles to
the laundry, the spin cycle may appear
slow.
As a result,the clothes may contain a
higher level of moisture or water.
•
The QUICK WASH course takes
approximately 19min. If inlet water
pressures are lower than normal (350Kpa).
Longer wash times may be encountered.
• There may be several parts of the wash cycle
7
6
4
water level is reached.
after the
started to supplement
when the tub rotates slower or
increased interval. This is normal.
Loading ...
Loading ...
Loading ...