Loading ...
Loading ...
Loading ...
7
OPERATING BASICS
To turn the chime back on, simply press the Doorbell
Select button again. You will hear a single confirmation
beep from the Indoor Alarm Receiver.
Low battery warning
The Indoor Alarm Receiver will notify you know when battery
power in your devices is running low.
• Install new batteries for your Indoor Alarm Receiver when
all 4 LED indicators start blinking at the same time.
• Install a new battery (CR2032) for your Doorbell when the
Doorbell LED indicator on the Indoor Alarm Receiver starts
blinking every 15 seconds.
Pairing your Doorbell
The Doorbell and Indoor Alarm Receiver in your kit have
already been paired so all you have to do is put batteries in and
your devices are ready to use. If for some reason pairing is lost,
here's how to pair them again:
1. Press and hold the Reset button on the back of the Indoor
Alarm Receiver until all the LED indicators light up. This
resets the Indoor Alarm Receiver.
2. Press and hold the Doorbell Select button on the back of
the Indoor Alarm Receiver until the Doorbell LED indicator
lights up.
3. Within 10 seconds, press the button on the Doorbell. The
Indoor Alarm Receiver plays the default chime to confirm
successful pairing.
Loading ...