Loading ...
Loading ...
Loading ...
Operating Your Heater
HEAT CONTROL SWITCH
• Check that the heat control switch at the back of the
heater is set to Off position before plugging the heater in
and turning on the mains supply.
• Turn the Power Switch at the back of the heater to the “I”
position.
CONTROL PANEL
• Press the Power button on the control panel to turn the
heater on, the unit will begin on High Heat.
• The LED will display the current room temperature and
both power indicators will be lit.
• Press the “-” button and the heater will begin to operate in
Low Heat.
• Press the “+” button and the heater will operate in High
Heat mode.
• The corresponding indicator light will display on the
• LED panel to show Low or High Heat operation
THERMOSTAT
Press the Temperature button then use the “+” and “-”
buttons to adjust the temperature to your desired setting
(from 5-36°C). Once you have set the desired temperature,
the LED will display the room temperature again and will rise
as the room temperature increases.
To find your preferred heat setting; set the thermostat to the
maximum setting. When the room reaches a comfortable
temperature for you, look at the temperature reading on the
heater and then set the heater to this temperature. The
heater will now cycle on and off to maintain the set
temperature.
NOTE: the temperature is read from a thermostat in the
heater, for a more accurate reading, position a separate
thermometer in another part of the room.
Loading ...
Loading ...
Loading ...