Loading ...
Loading ...
Loading ...
-
7
-
EN
4) Remove any adjusting key or wrench
before turning the power tool on.
A wrench or a key left attached to a ro-
tating part of the power tool may result in
personal injury.
5) Do not overreach. Keep proper footing
and balance at all times.
This enables better control of the power
tool in unexpected situations.
6) Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from moving
parts.
Loose clothes, jewelry or long hair can be
caught in moving parts.
7) If devices are provided for the connec-
tion of dust extraction and collection
facilities, ensure these are connected
and properly used.
Use of dust collection can reduce dust-re-
lated hazards.
Power tool use and Care
1) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
2) Do not use the power tool if the switch
does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired.
3) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools.
Such preventive safety measures reduce
the risk of starting the power tool acciden-
tally.
4) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
5) Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other con-
dition that may affect the power tools
operation. If damaged, have the power
tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
6) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
7) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed.
Use of the power tool for operations differ-
ent from those intended could result in a
hazardous situation.
Battery tool use and care
1) Recharge only with the charger speci-
fi ed by the manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fi re
when used with another batter pack.
2) Use power tools only with specifi cally
designated battery packs.
Use of any other battery packs may cre-
ate a risk of injury and fi re.
3) When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another.
Shorting the battery terminals together
may cause burns or a fi re.
4) Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
fl ush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
Service
1) Have your power tool serviced by a
qualifi ed repair person using only
identical replacement parts.
This will ensure that the safety of power
tool is maintained.
EY3640EY3641-U.indb7EY3640EY3641-U.indb7 2017/11/0110:39:232017/11/0110:39:23
Loading ...
Loading ...
Loading ...