Loading ...
Loading ...
Loading ...
PG.4
OPERATION
Applications
You may use this product for the following purpose:
• Clearing leaves and other debris from your hard surfaces.
• Keeping decks and driveways free from grass clippings,
leaves, pine needles and other debris.
To Install / Remove Battery Pack
See Figure 3, page 7
To install:
• To install the battery, slide the pack into the body of
the product.
• Make sure the latches on each side of the battery pack
snap in place and that the battery pack is secured in the
blower before beginning operation.
To remove:
• Locate the latches on the side of the battery pack and
depress both sides to release the battery pack from the
blower.
Charging Battery Pack
See Figure 4, page 8
•
to 3 hours. Due to federal regulations, the battery does
not come fully charged.
Do not allow familiarity with this product to make
you careless. Remember that a careless fraction of a
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes and other possible
serious injuries.
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended can
result in serious personal injury.
Unpacking
This product requires assembly.
Carefully remove the product and any accessories from
the box. Make sure that all items listed on the box are
included.
• Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
• Do not discard the packing material until you have
carefully inspected and operated the product.
If any parts are damaged or missing, please call 1-800-
406-2005
Assembling the Blower Tube
• Align the notch on the upper blower tube with the
raised ribs on the blower housing and push tube on to
the blower housing outlet until it is completely seated
on the housing.
• Align the notch on the lower blower tube with the
raised ribs on the upper blower tube and push the
lower tube onto the upper tube until it is completely
seated.
• To remove the blower tubes, slide tubes off.
ASSEMBLY
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could results in serious
personal injury.
Do not attempt to modify this product or create accesso-
ries or attachments not recommended for use with this
and could result in a hazardous condition leading to pos-
sible serious personal injury.
Always remove battery pack from product when you are
assembling parts, making adjustments, cleaning or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
PG.3
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
To avoid serious personal injury, always remove the
battery pack from the product when connecting or dis-
connecting blower tubes.
WARNING!
WARNING!
Loading ...
Loading ...
Loading ...