Loading ...
Loading ...
Loading ...
User instructions
16
3.2 Washing programs
Before starting a washing program make sure that:
The water supply tap is open.
The softener container contains regenerating salt.
The correct amount of detergent has been added to the
dispenser.
The baskets have been correctly loaded.
The spray arms are able to rotate freely and without
obstruction.
The dishwasher door is securely closed.
Warning:
during the initial phase of the washing program, the operation of sprayers
is not perceived because they start rotating about 5 minutes after the start.
This is the normal operation of the washing cycle.
CHILD SAFE
TY DEVICE
(on some models only)
Press the button to activate this device (the light comes on). When it is
active, the beeper sounds three times to confirm that the door is about to
open. So in this case, to open the door keep pressing until the 3rd beep,
then release at once. If the pressure is continued after the third beep, the
door does not open and the operation has to be repeated.
OPTION SELECTION
Options are selected by pressing the relative button by the symbol of the
option required; the light comes on to confirm that the option has been
activated.
It is not possible to select any options when the soak program
is being used.
All options except "Flexi Tabs" are disabled at the end of the
wash cycle. To disable the “Flexi Tabs” option, press the
relative button (the light goes out).
All options, including "Flexi Tabs" are disabled when a program
is CANCELLED after it has begun.
Loading ...
Loading ...
Loading ...