Loading ...
Loading ...
Loading ...
Black plate (162,1)
北米Model "A2470BE-B" EDITED: 2010/ 9/ 21
3-38 Instruments and controls
housing. That may cause a malfunction
in the mirror.
! Rear view image display
When the ignition switch is in the “ON”
position and the transmission is in the “R”
(reverse) position, the rear view camera
automatically displays the rear view image
behind the vehicle on the inside mirror.
Also, the following help lines are indicated
as a guide to help you realize the actual
distance from the display.
1) Vehicle width line (oblique vertical line)
2) Approx. 10 feet (3 m) from the bumper
(green horizontal line)
3) Approx. 6.5 feet (2 m) from the bumper
(green horizontal line)
4) Approx. 3 feet (1 m) from the bumper
(yellow horizontal line)
5) Approx. 1.5 feet (0.5 m) from the bumper
(red horizontal line)
By pressing the power button while the
transmission is in the “R” (reverse) posi-
tion, the rear view image display toggles to
the on or off mode.
Once the rear view image display is set to
the off mode, the display stays in the off
mode, with the function indicator in or-
ange, every t ime t he transm ission is
shifted into the “R” (reverse) position.
If the ignition switch is turned to the “OFF”
position, the display setting returns to the
on mode as a default setting the next time
the ignition switch is turned to the “ON”
position.
! Language mode change
The language mode of the captions on the
rear view image display is selectable in
English or French in the following ways.
1. Press and hold the power button for 6
to 12 seconds while the transmission is in
the “R” (reverse) position, and then
release it. The display will enter the
language selection mode.
2. Briefly press the power button to
toggle the captions on the display in
English or French.
3. By releasing the power button for 5
seconds, the display blinks one time to
show that the language mode is selected.
! Non-operational mode
The rear view image display can be set as
non-operational. After setting the display
to the non-operational mode, the display
does not show the rear view image even if
the ignition switch is reset (turning the
ignition switch to the “ON” position after
turning it to the “OFF” position).
To set the display to the non-operational
Loading ...
Loading ...
Loading ...