Loading ...
Loading ...
Loading ...
22
HOW TO USE THE MANUAL MODE
1. Touch the screen or press any button on the
console to turn on the console.
See HOW TO TURN ON THE POWER on
page 20.
2. Select the main menu.
When you turn on the console, the main menu will
appear on the screen after the console boots up.
Touch the home button at the bottom of the screen
or press the Manual button to return to the main
menu at any time.
3. Change the resistance of the pedals as desired.
Touch the Start button or begin pedaling.
As you pedal, you can change the resistance of
the pedals. To change the resistance, press one of
the numbered Quick Resistance buttons or press
the Resistance increase and decrease buttons on
the console. You can also press the Resistance
increase and decrease buttons on the right
handlebar.
Note: After you press a button, it will take a
moment for the pedals to reach the selected
resistance level.
4. Follow your progress.
The console offers several display modes. The
display mode that you select will determine which
workout information is shown.
To select the desired display mode, simply flick or
slide the screen. You can also view additional work-
out information by touching the red boxes on the
screen.
If desired, keep your pedaling speed near the tar-
get cadence. The target zone meter will prompt you
to increase, decrease, or maintain your pedaling
speed. To view the target zone meter, flick or slide
the screen. Note: The target cadence is displayed
in revolutions per minute (rpm).
If desired, adjust the
volume level by press-
ing the Vol increase and
decrease buttons on the
console or by pressing
the Volume increase and decrease buttons on the
left handlebar.
To pause the workout, touch one of the menu but-
tons on the screen. To continue the workout, touch
the Resume button. To end the workout session,
touch the End Workout button.
5. Measure your heart rate if desired.
To use the chest heart rate monitor, see page
15. To use the handgrip heart rate monitor, follow
the instructions below. Note: If you use both heart
rate monitors at the same time, the chest heart
rate monitor will have priority.
If there are
sheets of plas-
tic on the metal
contacts on the
handgrip heart
rate monitor,
remove the plas-
tic. To measure
your heart rate,
hold the handgrip
heart rate monitor
with your palms
resting against
the contacts. Avoid moving your hands or grip-
ping the contacts tightly.
When your pulse is detected, your heart rate
will be shown. For the most accurate heart
rate reading, hold the contacts for at least 15
seconds.
Contacts
Loading ...
Loading ...
Loading ...