Jbl Vrxaf Optional Hardware For Suspending Vrx918sp And/or Vrx932lap Enclosures VRX-AF

User Manual - Page 24

For VRX-AF.

PDF File Manual, 28 pages, Read Online | Download pdf file

VRX-AF photo
Loading ...
Loading ...
Loading ...
WARNING: Do not use the older VRX932LA-AF array frame to suspend powered VRX932LAP or
VRX918SP systems
INSTALLING THE ARRAY FRAME
The array frame is attached to the internal rigging of the VRX900 system using the provided Quick Release Pins
WARNING: Do not use any substitute for these pins.
1. Begin by attaching the two side arms (A) to either side of the center frame. Use a pair of the provided Quick
Release Pins (B) to attach the arms to the frame.
NOTE 1: Side arms should be attached with the rubber bumper facing up and away from the center frame.
The center frame is installed with the rubber gasket toward
the enclosure and the label right side up.
NOTE 2: The arms of the VRX932LA-AF and VRX-AF are
deliberately designed so as not to be interchangeable.
The arms of the VRX-SMAF are already attached.
2. Place the entire array frame on top of the VRX900 system
and flip up the drop levers (C) found on both sides of the
speaker to be received by the array frame arms.
3. Once the drop levers on the speaker are received by the
array frame, use a pair of the provided Quick Release Pins
(D) to attach the drop levers to the array frame.
(C)
(A)
(D)
(B)
(A)
(D)
MAXIMUM ARRAY SIZE
There are three variations of the VRX array frame. The VRX-AF supersedes the VRX932LA-AF. The VRX-SMAF
is solely intended for use with the VRX928LA and VRX915S. Before suspending a VRX array, determine which
version of the array frame you have and consult the table below to determine the maximum number of speakers
that may be safely suspended. The subwoofers must always be at the top of the array.
NOTE: For combination of passive and powered speaker systems use the table for powered speakers
(VRX932LAP and VRX918SP).
VRX932LA-AF Array Frame
VRX-AF ARRAY FRAME
The following table defines the maximum number of speakers that may be suspended using the VRX-AF frame.
A minimum design factor of 7:1 is maintained for all speaker configurations at or below those indicated in the table.
Maximum number of VRX918SP in array 023344
Maximum number of VRX932LAP in array 543210
24
VRX_Powered_UsersGuid012808 copy 3.qxp 1/30/08 4:52 PM Page 24
Loading ...
Loading ...
Loading ...