Loading ...
Loading ...
Loading ...
59
Using the Menu
HDR-HC1 2-631-458-11(1)
COMPONENT
Select [COMPONENT] when connecting
your camcorder to a TV with the
component input jack.
480i
Select when connecting your camcorder to
a TV with the component input jack.
1080i/480i
Select when connecting your camcorder
to a TV that has the component input jack
and is capable of displaying the1080i
signal.
i.LINK CONV
When the POWER switch is set to
CAMERA-TAPE, this setting is effective
only when [HDV1080i] is selected in [REC
FORMAT]. When the POWER switch is
set to PLAY/EDIT, this setting is effective
only when [AUTO] or [HDV] is selected in
[VCR HDV/DV].
OFF
Select to output the pictures from the
HDV/DV Interface (i.LINK) jack in
accordance with the [REC FORMAT] and
[VCR HDV/DV] settings.
ON HDVDV
Select to always output the pictures in the
DV format from the HDV/DV Interface
(i.LINK) jack.
• See [VCR HDV/DV] for information about an
input signal via an i.LINK connection (p. 56).
• Disconnect the i.LINK cable (optional) before
setting [i.LINK CONV]. Otherwise, the
connected video device may not be able to
recognize the video signal from this camcorder.
TV TYPE
You need to convert the signal depending
on the TV connected when playing back
the picture. The recorded pictures are
played back as following illustrations.
Continued
16:9
Select to view your pictures on a 16:9
wide TV.
DV format picturesHDV format pictures
4:3
Select to view your pictures on a 4:3
standard TV.
DV format
pictures
HDV format
pictures
• When you connect your camcorder to a TV
compatible with the ID-1 system, or via an
S VIDEO jack, and play back the tape, set
[TV TYPE] to [16:9]. The TV automatically
switches the aspect ratio according to the
playback picture.
Refer also to the manual supplied with your TV.
USB SELECT
Select [USB SELECT] to view pictures on
a computer via the USB cable (supplied)
(p. 73), or connect your camcorder to a
PictBridge compliant printer.
MEMORY STICK
Select to view pictures in the “Memory
Stick Duo.”
PictBridge PRINT
See page 70.
DISP GUIDE
See page 19.
STATUS CHECK
You can check the setup value of the
following items.
– [COMPONENT] (p. 59)
– [i.LINK CONV] (p. 59)
Loading ...
Loading ...
Loading ...