Loading ...
Loading ...
Loading ...
(1)
(2)
(3)
(1) dipstick
(2) tip mark
RIGHT SIDE
(3) oil fill cap
(4) lower level mark
(4)
123
Checking & Adding Oil
Engine Oil & Filter
Servicing Your Honda
Safety Precautions
Before riding your ATV, check the engine oil level.
Refer to on page .
Check the engine oil level each day before operating your ATV and add
if needed.
Park your ATV on a firm, level surface.
Insert the dipstick without screwing it in, then remove the dipstick and
check the oil level.
If the oil level is above the tip mark ( ), install the dipstick and
proceed to the oil level check.
If the oil does not stick to the dipstick or the oil level is below the tip
mark, do not start the engine.
Before starting the engine, remove the oil fill cap ( ) and add the
specified oil into the fill cap hole, up to the lower level mark ( ) on
the dipstick. Do not over fill.
Reinstall the oil fill cap and dipstick.
Proceed to the oil level check.
Remove the dipstick ( ) from the oil tank and wipe it clean.
(cont’d)
1.
2.
3.
1
2
4
105
3
１１／０７／１３ １４：１２：５３ ３１ＨＮ２７１０ ０１３２
Loading ...
Loading ...
Loading ...