Loading ...
Loading ...
Loading ...
STORM WINDOW REQUIREMENTS
A storm window frame will not allow the
air conditioner to tilt toward the outside,
and will keep it from draining properly.
To adjust for this, attach a piece of wood
to the sill.
WOOD PIECES –
WIDTH: 2″
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness,
place a piece of wood on the sill to make
it 1/2″ higher than the top of the storm
window frame or the vinyl frame.
Attach securely with nails or screws
provided by the installer.
Window Installation Instructions
WINDOW REQUIREMENTS
• These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within
reach of the power cord.
1
2
REMOVE THE FRONT GRILLE
(IF ATTACHED)
Open the inlet grille
downward by pulling
out the upper corners
of the inlet grille.
Lift it up and off.
Grasp the filter
at the top center
and pull it out.
Remove the screw
from the grille.
Gently but firmly grasp
the lower grille corners,
press in on the case
sides and pull forward
to release.
NOTE: Do not pull the
bottom edge toward you
more than 3″ or you
may damage the tabs of the grille.
Lift the grille up and off the top tabs.
4
18
1
⁄2″ min.
30″ to 40″
(With accordion panels)
A
D
E
1/2″ higher
than storm
window
frame
Storm window
frame
Wood
Sill
1/2″ higher
than vinyl frame
(on some windows)
Vinyl frame
9
B
C
PREPARE THE WINDOW
Cut the window sash seal to the proper
length. Peel off the backing and attach the
seal to the underside of the window sash.
3
Loading ...
Loading ...
Loading ...