Loading ...
Loading ...
Loading ...
7)
INSTALLATION INSTRUCTIONS – installing your Cooker Hood
KITCHEN UNIT / UNDERSIDE OF CABINET INSTALLATION
NOTE: Ensure that the grease filter grille has been removed.
1) (E) Extraction Function only:- Cut a hole measuring 130mm in diameter in the external
wall behind the cupboard into which the
hood will be set and then attach one end
of the ducting hose to it. The other end
should be connected to the rear of the
2) If necessary, make a hole for the power
cable to feed through.
3) Hold the hood against the underside of
the hood and mark the points for the
supporting and fastening holes.
4) Screw in the four screws supplied with
the installation accessory kit.
5) Hook the hood onto the supporting
screws and tighten them complet
(Fig. 4 – on right). Alternatively, use
the attachment holes near the previous
ones.
ely
__________________________
14
cooker hood.
6) Close the grease filter grille.
Loading ...
Loading ...
Loading ...