Loading ...
Loading ...
Loading ...
To remove:
Pull the drawer out to the stop position.
Rotate all four swing locks to the unlock
position.
Lift the front of the drawer up and out.
To replace:
Make sure all four swing locks are in the
unlock position.
Place the sides of the drawer into the
drawer supports, making sure the swing
ORFNV¿WRQWKHGUDZHUVORWV
Lock all four swing locks by rotating them
to the lock position.
7
Empty the pan. Place the Chill/Thaw tray in
the pan. Place the items on the tray and
close the pan completely.
LCD Models:
Access by: Home > Options > Refrigerator
Options > CustomCool Pan
ExpressChill can be set to 15, 30 or 45
minutes. The default is 15 minutes.
7RVWRSDIHDWXUHEHIRUHLWLV¿QLVKHG
For LCD Models:
Go into that feature’s menu and press
the OFF button.
During ExpressThaw and ExpressChill,
the display on the controls will count
down the time in the cycle (on some
models).
After the ExpressThaw cycle is complete,
the pan will reset to the MEAT setting
(32°F [0°C]) to help preserve thawed
items until they are used.
The displayed actual temperature of the
CustomCool pan may vary slightly from
the SET temperature based on usage
and operating environment.
NOTE: For food safety reasons, it is
recommended that foods be wrapped in
plastic wrap when using ExpressThaw. This
will help contain meat juices and improve
thawing performance.
About CustomCool
™
. (on some models) GEAppliances.com
The CustomCool
™
feature is used to quickly
chill items, thaw items or hold the pan at a
VSHFL¿FWHPSHUDWXUH7KLVIHDWXUHLVDV\VWHPRI
dampers, a fan, a temperature thermistor and
a heater.
The pan is tightly sealed to prevent temperature
ÀXFWXDWLRQVLQWKHUHVWRIWKHUHIULJHUDWRU
The controls for this pan are located on the
dispenser with the temperature controls.
How to Use
ExpressThaw
™
How to Remove and Replace the Drawer
ExpressChill
™
LCD Models Only
How it Works
REFRIGERATOR OPTIONS
BACK
BEVERAGE
CENTER
CUSTOM COOL
PAN
TURBOCOOL
LCD Models Only
Loading ...
Loading ...
Loading ...