Loading ...
Loading ...
Loading ...
22
Make sure dimmable bulbs are used. The electronic board
is designed for dimmable light bulbs and using non-dimma-
ble types will cause damage and faulty performance.
Shut the main circuit breaker OFF while inserting new
bulbs or while changing bulbs. If an electrical short occurs
while the main power circuit is ON, significant damage can
occur.
Follow the diagram to the right.
1. Insert a bulb into one of the light sockets.
2. Attach the suction cup to the lens of a dimmable light
bulb. (Both are supplied parts.)
Make sure the bulbs are clean and dry so the
suction cup will stick.
3. Screw it into place and remove the suction cup.
4. Repeat for the remaining light fixtures.
5. Switch the main circuit power ON.
Replacement Part
Number
Replacement Kit
Description
702666
Dimmable LED 7.5W
(1 bulb + 1 suction cup)
700975
Halogen Bulb 75W
(1 bulb + 1 suction cup)
TIP: Replace all bulbs when changing from LED to
Halogen because of the difference in light color.
Installation Instructions
Inserting Dimmable Light Bulbs
Size: PAR16, E26/27
75 Watt max., 60 Amp
Inserting Light Bulbs with the
Suction Cup Tool
2
1
Loading ...
Loading ...
Loading ...