Loading ...
Loading ...
Loading ...
Basic Operation & Riding
70
Riding Your ATV
Your ATV is designed to travel through water up to approximately
10 inches (254 mm) deep. Before crossing a stream, make sure the
water is not too deep or flowing too fast.
1.
Choose a path where both banks have gradual slopes.
2.
Proceed through the water at a slow, steady speed.
3.
Watch out for submerged obstacles and slippery rocks.
4.
Avoid getting the spark plug or air cleaner wet, as this would
c
ause the engine to stop.
5.
After leaving the water, always test both the front and rear
b
rakes.
• Riding through water can make the brakes less effective
than
n
ormal, and may reduce stopping ability.
• If necessary, apply the brakes repeatedly until they dry out and
operate normally.
Riding Through Water
3
WARNING
The ATV tires have some ability to float.
Operating this ATV through deep or fast-
flowing water may cause a loss of traction
and loss of control, which could lead to an
accident.
Never operate this ATV in fast-flowing water
or in water deeper than that specified in this
owner’s manual.
Loading ...
Loading ...
Loading ...