Loading ...
Loading ...
Loading ...
Black plate (405,1)
北米Model "A1220BE-A" EDITED: 2014/ 8/ 28
is not a malfunction.
. If the accelerator pedal is depressed
while the vehicle is stopped, the engine
speed will not increase to a high rate of
revolution.
. You may not restart the hybrid
system immediately after turning the
ignition switch to the “LOCK” (off)
position while the engine has been
automatically stopped. In such a case,
wait a few seconds and then perform
the starting procedure.
. When you cannot start the hybrid
system, confirm that the security in-
dicator light illuminates. If the indicator
light illuminates, perform the proce-
dure described in “Immobilizer” F2-3.
& Models without “keyless ac-
cess with push-button start
system”
! Starting the hybrid system
1. Apply the parking brake.
2. Turn off unnecessary lights and ac-
cessories.
3. Shift the select lever to the “P” or “N”
position (preferably the “P” position). The
starter motor will only operate when the
select lever is at the “P” or “N” position.
4. Turn the ignition switch to the “ON”
position and check the operation of the
warning and indicator lights. Refer to
“Warning and indicator lights” F3-12.
5. Turn the ignition switch to the “START”
position without depressing the accelera-
tor pedal. Release the key immediately
after the engine has started. If the hybrid
system is started up after the engine has
been started, the Hybrid READY Indicator
Light on the combination meter will illumi-
nate.
If the hybrid system does not start, try the
following.
(1) Turn the ignition switch to the
“LOCK” (off) position and wait for at
least 30 seconds. After checking that
the parking brake is firmly set, turn the
ignition switch to the “START” position
while depressing the accelerator pedal
slightly (approximately a quarter of the
full stroke). Release the accelerator
pedal as soon as the engine starts.
(2) If this fails to start the engine, turn
the ignition switch back to the “LOCK”
(off) position and wait for at least 30
seconds. Then fully depress the accel-
erator pedal and turn the ignition
switch to the “START” position. If the
engine sta rts, qui ckly re lease t he
accelerator pedal.
(3) If this fails to start the engine, turn
the ignition switch again to the “LOCK”
(off) position. After waiting for 30
seconds or longer, turn the ignition
switch to the “ START” position without
depressing the accelerator pedal.
(4) If the engine still refuses to start,
contact your nearest SUBARU dealer
for assistance.
6. Confirm that all warning and indicator
lights (except Hybrid READY Indicator
Light) have turned off after the engine
has started. The fue l in jection system
automatically lowers the idle speed as
the engine warms up.
While the engine is warming up, make
sure that the select lever is at the “P” or
“N” position and that the parking brake is
applied.
CAUTION
Do not operate the starter motor
continuously for more than 10 sec-
onds. If the engine fails to start after
operating the starter for 5 to 10
seconds, wait for 10 seconds or
more before trying again.
NOTE
If you have to start the engine while
depressing the accelerator pedal when
the engine is having difficulties start-
ing, switch to the brake pedal immedi-
Starting and operating/Starting and stopping the hybrid system
7-9
– CONTINUED –
7
Loading ...
Loading ...
Loading ...