Loading ...
Loading ...
3
www.jbl.com
Volume Up/Down buttons: Press these buttons to raise and lower the OnBeat Rize’s
volume. To mute the sound, press both buttons at the same time. (The clock display will
show “00” for three seconds when the mute is on.) To restore the sound press either
Volume button.
Power button: When the OnBeat Rize is on, press the Power button to put it into the
standby mode. (The clock display will dim in the standby mode.) When the OnBeat Rize
is in standby, press the Power button to turn it on. (The clock display will illuminate at full
brightness when the unit is on.)
When the OnBeat Rize is in the standby mode it will automatically turn on when it detects
audio playing from a docked device or when it detects wake-up alarm audio from a docked
device.
When the OnBeat Rize is on, it will automatically enter the standby mode after 10 minutes
of inactivity (no audio input and no user-control operation).
When the alarm is active, press the Power button to turn the alarm off.
Note: When the OnBeat Rize enters the standby mode it will also bring a docked device
into standby mode.
Source button: Each press of this button cycles the active source between a docked
device and a device connected to the Audio input. An icon that indicates the active source
will appear on the display screen.
If you begin to play audio from a docked device while you’re listening to a device connected
to the Audio input, the OnBeat Rize will automatically switch sources to the docked device.
Display screen: When a device is docked in the OnBeat Rize the Display screen will show
the current time and an icon indicating the active source.
Snooze button: When you are using the JBL AmpUp App in a docked device, press the
Snooze button to stop the alarm for a predetermined amount of time. To download the
JBL AmpUp App go to the Apple App Store.
When the OnBeat Rize is in standby, you can press the Snooze button to turn it on.
SettInGS
Clock brightness: You can adjust the brightness of the clock readout to one of three
settings (Bright, Medium, Dim) by pressing the Snooze button while the OnBeat Rize is on,
but no audio is playing through it.
Clock format: Press and hold the Snooze button to cycle the clock between the 12-hour
and 24-hour format.
UPGRaDInG FIRmWaRe
You can upgrade the OnBeat Rize’s firmware from within the JBL AmpUp App that is
installed on a docked device.
Visit the Apple App Store to download the JBL AmpUp App.
Loading ...
Loading ...
Loading ...