Loading ...
Loading ...
Loading ...
14
Troubleshooting
TROUBLESHOOTING GUIDE
Before carrying out any of the following service checks, unplug the unit from the power outlet.
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
Not working.
Power plug is disconnected.
Plug the power cord into the power
socket.
The tank is full of water.
Empty the water tank.
The tank is not in the right
position.
Position the water tank correctly in the
unit.
Dehumidification
strength has decreased.
The filter is too dirty.
Clean the filter.
The air inlet or outlet is blocked.
Remove the object that is blocking the
air inlet or outlet.
Loud noises coming
from the dehumidifier.
The dehumidifier is on an
uneven surface.
Position the dehumidifier on a smooth
and stable surface.
The dehumidifier
suddenly stops.
The room temperature may
be outside of the zone of the
dehumidifier.
The dehumidifier will start
automatically when it can read the room
temperature again.
Clothing dries very
slowly.
The room temperature is too
low.
If the room temperature is too low, the
clothing will dry slower than usual.
No reduction of
humidity in the room.
The room is too large for the
unit.
Move to a smaller room.
Doors and/or windows in the
room are not closed.
Close any doors or windows in the
room.
A noise keeps turning
on and off during
operation.
Similar to a refrigerator noise,
the compressor will turn off and
on during operation.
This is normal.
The dehumidifier seems
to shudder at times.
The unit will shudder slightly as
the compressor turns on and off.
This is normal.
LAD300_200_ANZ_IB_B19.indd 14 8/4/19 1:56 pm
Loading ...
Loading ...