Loading ...
Loading ...
Loading ...
5
Before cleaning, ensure that
your steam generator is
u
nplugged and that the sole-
plate and the iron rest have
cooled down.
Do not use any
descaling substances
(vinegar, industrial
descaling products,
etc.) when rinsing the
anti-scale collector :
they could damage it.
Before descaling or
cleaning your
generator, you must
let it cool down for at
least 2 hours to avoid
any risk of burns.
Maintenance and cleaning
Cleaning your generator
• Do not use detergent or descaling products for cleaning the soleplate
base-unit.
• Never hold the iron or the base unit under the tap.
• Regularly clean the soleplate with a damp, non-metallic washing-up pad.
• Clean the plastic parts of the appliance occasionally with a soft cloth.
Descaling your generator easily :
For longer generator life, and to avoid scale emissions, your generator is equipped
with a built-in anti-scale collector. This collector, located in the tank, automatically
removes the scale that forms inside.
Operation:
• An orange “anti-scale” light located on the control panel starts blinking to tell you
that the anti-scale collector needs rinsing -
fig.11.
Caution: this operation must not be performed until the generator has
been unplugged for at least two hours and has completely cooled down.
When performing this operation, the generator should be placed near a sink
as water may flow out of the tank when it is opened.
• Once the generator has cooled down completely, remove the anti-scale collector
cap -
fig.12.
• Unscrew the anti-scale collector and remove it from the housing; it contains the
scale that has built up in the tank -
fig.13 and fig.14.
• To clean the collector properly, just rinse it under running water to remove the
scale it contains -
fig.15.
• Put the collector back into its housing and screw it in completely to keep it water-
tight -
fig.16.
•
Refit the scale collector cover -
fig. 18.
The next time you use your iron, press the “restart” button on the control panel
to turn off the orange “anti-scale” light.
Storing your generator
• Press the illuminated on/off switch and unplug the generator. Store the electrical
cord in its storage place –
fig.17.
• Raise the retaining hoop over the iron until it locks into place (audible click) –
fig.2.
Your iron is then safely retained on its base. Warning: do not touch the soleplate
while still hot.
• Wind the steam cord around the generator and insert it in its side storage place. –
fig.18.
• Leave the iron (and the iron rest) to cool down for 30 minutes.
• You can then put your steam generator away, carrying it by the handle –
fig.1.
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
‹ Leave it at a civic waste disposal centre.
EN
1800119824 GTG3 GV8700E0_110x154 29/06/10 15:23 Page5
Loading ...
Loading ...
Loading ...