Loading ...
Loading ...
Loading ...
14
49-6000243 Rev. 0
Installation Instructions
Mounting Your Water Heater
To mount your water heater
NOTE: Model number can be found on the product rating label. Make sure you are referencing the correct diagram
for your model of water heater.
The water heater should be mounted on a surface using the screw slots located on the rear case of the water heater
with a minimum of 4 screws (provided with the product). Make sure to secure the water heater to surface using a
screw through the safety tab located in between plumbing connections.
Follow the provided installation template for easy screw location. Reference installation location section of this
manual for recommended clearances on all sides of the water heater.
Ensure that the mounting surface is solid and secure. Screws should be secured into wall studs when possible. If
stud mounting cannot be achieved, use provided screw anchors to ensure secure mounting of water heater.
Tools required:
• Phillips head screwdriver
• Drill
• Pencil
• Tape measure
• Level
Mounting Instructions:
1. Locate mounting slots on rear case of water heater.
2. Locate installation template in water heater packaging.
3. Place template on wall and use pencil to mark screw hole locations.
4. If screw locations are in wall stud, drive mounting screws directly into stud. if screw locations are not in stud,
prepare hole with anchor and then drive screw into wall anchor.
5. Place water heater on wall and slide onto mounting slots.
6. Secure water heater to wall with screw through safety tab.
7. Ensure water heater is level and secure on wall.
afety
Tab
INSTALLATION INSTRUCTIONS
Loading ...
Loading ...
Loading ...