Loading ...
Loading ...
Loading ...
5
OPERATION
1. Remove the lid from the humidifier.
2. Fill the humidifier with tap water ensuring that the water level is above metal probe at the
rear of the tank, but below the max level label.
3. Reattach the lid to the humidifier, ensuring that the oval tab on the lid lines up with the
cut out on the rear of the humidifier.
4. Connect the plug to a wall socket.
5. Press the power button to turn the unit on.
6. Use the control panel to adjust the mist output and turn the illumination on and off.
Note: If the water level is too low, the display panel will flash red for 60 seconds before
powering off.
CONTROL PANEL
The + and – buttons can be used to adjust the mist output. The current mode is indicated by
the colour of the light around the control panel.
MIST SETTING
INDICATOR COLOUR
High
Blue
Medium
Green
Low
Red
The LED button can be used to turn the LED lighting on and off, both around the control
panel and within the water tank.
Loading ...
Loading ...
Loading ...