Loading ...
Loading ...
Loading ...
EdgeStar Built-in Beverage Cooler 6
Installing the Door Handle
To install the door handle:
1. Remove the four screws from the side of the door. This should
be the side opposite of the door hinge.
2. Place and align the openings of the handle hinges over the
screw holes.
3. Insert and tighten the screws to hold the handle in place.
CAUTION: Do not over-tighten the screws as this may cause
damage to the handle or to the stainless steel door.
Installing and Removing the Shelves
To prevent damaging the door gasket, make sure to open the door all the
way before pulling the shelves out of their track.
To install the shelves:
1. Open the door completely.
2. Slide the shelf on the shelf track and slowly push back until it stops.
3. Install the plastic notches.
To remove the shelves:
1. Open the door completely.
2. If necessary, make sure you remove all the contents sitting on the
shelf.
3. Remove both of the plastic notches with a screwdriver.
4. Continue to pull the shelf forward until it is completely removed from
the inner compartment.
Loading ...
Loading ...
Loading ...