Loading ...
Loading ...
Loading ...
5. TROUBLESHOOTING
Service problems can often be solved easily. This guide can help you troubleshoot.
Problem
Cleaner will
not run
Check What to do
Cleaner does
not pick up or
has low suction
Extension
wand and
tools will not
stay together
• Replace fiinner bag. See “Replacing the Inner Bag”
• Clear obstruction
• Replace the white bag gasket
• Return to Service Center for repair
• Push and twist the tools together to
properly attach
• Inner Bag is full
• Hose/wand tool is clogged
• Air leak due to missing or
damaged gasket
• Proper friction fiffififiit is not
being obtained
• Not plugged in properly
• No electricity in wall outlet
• Blown fuse or tripped breaker
• Motor Protector tripped
• Be sure cleaner is ffififiirmly plugged
into wall outlet
• Check electrical source – fuse
or circuit breaker in home
• Replace Fuse or reset breaker
in home
• See thermal protection box.
17
THERMAL PROTECTION
A thermal protector has been
designed into your cleaner to protect
it from over heating. When the
thermal protector activates the
cleaner will stop running. If this
happens proceed as follows: 1. Turn
cleaner OFF and unplug it from the
electrical outlet. 2. Check fullness
of bag, change if needed. 3. Inspect
the hose or accessory for any
obstructions. Clear obstructions
if present. 4. When cleaner is
unplugged and motor cools for 30
minutes, the thermal protector will
deactivate and cleaning may continue.
If the thermal protector continues to
activate after following the above
steps, your cleaner needs servicing.
TO REDUCE THE RISK OF PERSONAL INJURY–
UNPLUG BEFORE CLEANING OR SERVICING.
IF APPLIANCE IS NOT WORKING AS IT SHOULD, HAS BEEN DROPPED,
DAMAGED, LEFT OUTDOORS, OR DROPPED INTO WATER, TAKE IT TO A
SERVICE CENTER PRIOR TO CONTINUING USE.
ANY OTHER SERVICING SHOULD BE
DONE BY AN AUTHORIZED SERVICE
REPRESENTATIVE.
WARNING!
!
!
Loading ...
Loading ...
Loading ...