Loading ...
Loading ...
Loading ...
25OPERATION
ENGLISH
NOTE
• To change the temperature mode from °F to °C (or vice versa) press and hold the Refrigerator and
Freezer buttons simultaneously for approximately five seconds. The temperature indicator on the
display window switches between Celsius and Fahrenheit.
• The displayed temperature is the target temperature, and not the actual temperature of the refrigerator.
The actual refrigerator temperature depends on the food inside the refrigerator.
e Fresh Air Filter
†
The Fresh Air Filter helps remove odors from the refrigerator.
NOTE
• Replace the air filter when the g icon turns on. After replacing the air filter, press and hold the Fresh Air
Filter button for three seconds to turn the icon light off. Replace the air filter approximately every six
months.
f Lock
The lock function disables every other button on the display.
• When power is initially connected to the refrigerator, the lock function is off.
• To lock the control panel buttons, press and hold the Lock button until the k icon appears in the
display and the function is activated.
• To disable the function, press and hold the Lock button for approximately three seconds.
g Water Filter
Replace the water filter when the h icon turns on. After replacing the water filter, press and hold the
Water Filter button for three seconds to turn the icon light off. Replace the water filter approximately
every six months.
h Wi-Fi
The Wi-Fi button, when used with the LG ThinQ app, allows the refrigerator to connect to a home Wi-Fi
network. Refer to Smart Functions for information on the initial setup of the application.
The
f icon shows the status of the refrigerator's network connection. The icon illuminates when the
refrigerator is connected to the Wi-Fi network.
Press and hold the Wi-Fi button for 3 seconds to connect to the network. The icon blinks while the
connection is being made, then turns on once the connection is successfully made.
i Water & Ice Type
Select the desired dispenser mode from the buttons on the dispenser control panel. Press the
dispenser switch with a glass or other container to dispense cubed ice, water or crushed ice.
j Self Care
†
UV light is used to keep the water outlet clean. UV clean function runs automatically for 10 minutes
every hour or can be manually activated at any time.
Press this button to activate it manually.
NOTE
• During operation, the function stops if the Water button is pressed. It resumes automatically after 1
hour.
• The function runs automatically for 10 minutes every hour without requiring you to press the Self Care
button.
• UVnano is a compound word derived from the words UV and its unit, a nanometer.
us_main.book.book Page 25 Thursday, April 1, 2021 8:20 AM
Loading ...
Loading ...
Loading ...