Loading ...
Loading ...
Loading ...
1. The furniture’s dimensions must comply
with those shown in Figure 1. The appliance
can be inserted under the worktop between
two (a) or placed as a terminal unit(b).
2. After inserting the appliance in the
appropriate furniture(Figure 2), you must
adjust its height using the 4 adjustable
feet(Figure 3). The height can be adjusted
from 82 to 87 mm.
3. Fitting the door panel
1) Remove the upper fixing flanges from the
appliance’s door(Figure 4).
2) Fasten the flanges onto the furniture’s
door, following the instructions mentioned in
the diagram;
-Distance A is the one from the top edge of
the appliance’s door to the lower edge of the
worktop.-Distance B is the one from the top
edge of the door on the furniture next to the
lower edge of the worktop.
3) Fasten the furniture’s door on to the
ap pl ia nce by ti gh te ni ng the up pe r
nuts(Figure 5-A/B). Align the furniture’s door
to those on the neighbouring units by
adjusting the position of the flanges to the
furniture’s door (Figure 5-D).
Instructions for built-under installation
825-870
600
600
550
600
b
a
16
Hisense Refrigerator
Loading ...
Loading ...
Loading ...