Loading ...
Loading ...
Loading ...
www.NutriChefKitchen.com
8
4. Setting time: Clockwise is increase (counterclockwise is decrease), time range
is1-24h (one gear for every 1h)
Working mode: When the product is working, (the clock, Fahrenheit and hour
icon are on), the screen displays the setting temperature, and the time displays
the countdown. When the countdown is less than 1 hour, the time counts down
to 60 minutes, the minute indicator is on, and the hour indicator is o.
5.There is a “bee” sound when you press the button every time.
6.During the working mode，press the “ON/OFF”button，the temperature and the
time icon are ashing, you can adjust the time and temperature. After the adjustment,
press the “ON/OFF” button to conrm. If there is no operation within 5 seconds
or did not press the “ON/OFF”button to conrm, the system will automatically
enter the previous program (follow pre-adjustment program).
7.After times up, the product will have 20 “bee” sound, and enter to the standby
mode.
8.Press the "ON/OFF" button for 3 seconds to turn o the product, enter to the
standby mode.
NOTE:
Set low temperature for thin/small pieces of food or for a small load of food.
Set high temperature for drying thick/big pieces of food and large loads.
The thermostat can also be used to decrease the temperature as the food is near
the end of its drying cycle making it easier to control the nal moisture level in
the food.
Make sure that the fan base is always in place when operating the dryer. If you
do not have time to dry all the food in one day, you can dry them the next day. In
this case, you should store the food in a container/polyethylene bag and put it in
the freezer.
3. Unplug the unit from the power point.
Loading ...
Loading ...
Loading ...