Loading ...
Loading ...
Loading ...
DISPLAY
FAN SPEED
• Every time you push this button, it advances the setting as follows: {High _Low _Med _High}
REMOTE CONTROL SIGNAL
RECEIVER
TEMPERATURE SETTING
• This button can automatically control the
temperature of the room.
The temperature can be set within a range
of 60°F to 86°F by increments of 1°F.
POWER
(-TIMER
- SHUT-OFF TIME
• You will usually use shut-off time while you sleep.
• If unit isrunning,Timer sets numberof hours untilshut-off.
• Everytime you pushTimerbutton, it advancesthe Timersetting
asfollows: 1 Hour * 2Hours ...... 12 Hoursmaximum.
• Toturn the airconditionerON, push the
button.
Toturn the air conditioner OFF, push
the button again.
• This button takes priority over any other
button.
• When you first turn it on, the air conditioner is
on the High coolmode andthe Temp.at 72°F.
- START TIME
• If unit isoff, Timer setsnumberof hours beforeunit starts.
• Everytime you pushTimerbutton, it advancesthe Timersetting asfollows: 1 Hour _2 Hours ....... 12Hours
maximum.
MODE
- Every time you push this button, it will shift among COOL, ENERGY SAVER and FAN.
- ENERGY SAVER:
• The fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is
needed.
In failure of electric power, the unit runs as previous setting operation. J
HORIZONTAL AIR DIRECTION CONTROL VERTICAL AIR DIRECTION CONTROL
The horizontal air direction is adjusted by moving The vertical air direction is adjusted by moving the
horizontal louvers up and down with your fingertips.
the vertical louvers right and left with your (FIG. 25)
fingertips. (FIG. 24)
FIG. 24 FIG. 25
-11 -
Loading ...
Loading ...
Loading ...