Loading ...
Loading ...
Loading ...
7
CHILD LOCK
Hold the LOCK button for 5 seconds to activate the child lock. The LED
indicator will illuminate to show the child lock is activated. To turn it off, hold
the LOCK button again for 5 seconds.
`
WIFI
Hold the WIFI button for 6 seconds to reset the WIFI module ready for
connection, or to change the connection method between AP (Access point)
and CF (Quick Connection) modes. This also resets the WIFI module.
OK INDICATOR
When lit, shows that the desired humidity set has been reached, and the
compressor is in standby mode
DEFROST INDICATOR
The appliance will defrost automatically when the coil sensor detects that the
internal temperature is too low. During defrosting the indicator will light up.
Once the defrost cycle has finished, the appliance will return to the mode that
was previously operating.
TANK FULL
When the water tank is full, the TANK FULL indicator light will flash, and the
unit will stop operating. Once emptied and replaced, the appliance will resume
operation.
DISPLAY
As default, the unit will display the current humidity of the room. The unit is
also able to display the current room temperature. Press the UP and DOWN
buttons at the same time to change between the units shown.
If the UP or DOWN buttons are pressed, the display will show the desired
humidity set on the dehumidifier.
While the timer is set, the unit will display the duration of the timer.
Loading ...
Loading ...
Loading ...