Loading ...
Support
If you encounter any issues during installation or configuration, please visit
www.tp-link.com/support for web support and troubleshooting information.
Smart Wi-Fi Light Switch
Blinking Amber and Green: App-Config mode initiated.
Green: Lit up for about 30 seconds when successfully
connected to the Wi-Fi network, then turns off.
Blinking Amber: Resetting.
Red: No Wi-Fi connection.
White: Lit up when the light is switched OFF to show the
Smart Switch location in the dark.
Press to reboot the Smart Switch.
Press and hold (about 5 seconds) until the Wi-Fi status LED
blinks amber and green alternately to initiate App-Config
mode.
Press and hold (about 10 seconds) until the Wi-Fi status LED
blinks amber rapidly to factory reset the Smart Switch.
Troubleshooting
1. What should I do when I can’t turn the Smart Switch on/off manually?
If the Smart Switch doesn’t respond when pressing the physical switch:
• Make sure that you restore power to the Smart Switch at the circuit breaker.
• Make sure the Smart Switch is wired correctly. Please consult with a qualified
electrician.
2. What should I do when the Smart Switch doesn’t respond to commands or
scheduled automations?
• Check your network connectivity.
• Check if the Wi-Fi status LED on the Smart Switch is blinking amber and
green. If so, reconnect the Smart Switch to your Wi-Fi network.
• Do not use a metal faceplate with the Smart Switch to prevent Wi-Fi signal
interference.
• Power cycle your router and/or reboot the Smart Switch by pressing the
RESTART button underneath the switch.
• Factory reset the Smart Switch by pressing and holding the RESET button.
You’ll need to configure the Smart Switch again.
3. How do I pair the Smart Switch with Amazon Echo?
Visit www.tp-link.com/en/faq-944.html or within the Kasa Help section for
pairing instructions.
RESET
RESTART
© 2016 TP-Link. All rights reserved.