Loading ...
TAKING A PHONE CALL
Using your speaker
The following functions are available when paired to a
phone with Bluetooth:
• Reject an incoming call:
Press and hold (Play/Pause/Call).
• Answer an incoming call:
Press (Play/Pause/Call).
• Switch audio between your speaker and phone during
a call, or switch between two calls:
Press and hold (Play/Pause/Call).
• End current call:
Press (Play/Pause/Call).
• Redial the last dialed number:
Press (Play/Pause/Call) twice.
RECONNECTING TO A PAIRED DEVICE
• Make sure that the last paired Bluetooth device is near
your speakers.
• When your speaker is on, it automatically searches
for and tries to connect to the last paired device.
USING YOUR SPEAKER
Listening to audio
1 Connect to your speaker with Bluetooth or a 3.5 mm audio
cable.
2 Play audio on your connected device.
3 Press + or - to adjust your speaker’s volume.
Note: Make sure that your connected device’s volume is set to at
least 50%.
4 Use the controls on your connected device to control
playback.
RESETTING YOUR SPEAKER
To reset your speaker, use a proper tool to press RESET .
Note: Resetting your speaker eliminates all previous Bluetooth
devices from memory.
SPECIFICATIONS
Dimensions (H × W × D): 2.9 × 4.8 × 2.0 in.
( 7.35 × 12.2 × 5.2 cm)
USB charging cable: 20 in. (50 cm)
Net weight: .5 lbs. (227 g)
Gross weight: .69 lbs.(314 g)
Charging current: 5V 1A
TROUBLESHOOTING
No power
• Make sure that your speaker is plugged in.
• Make sure that your speaker is turned on.
No sound or low volume
• Make sure that your Bluetooth device is turned on,
Bluetooth is turned on, and Insignia Mini Sonic is
selected.
• Turn up the volume on your speaker.
• Turn up the volume on your Bluetooth device.
• Make sure that your Bluetooth device is not muted.
• Make sure that your speaker is not paired to
another Bluetooth device.
• Make sure that your Bluetooth device is not paired
to another Bluetooth device.
Cannot establish Bluetooth connection
• Shorten the distance between your speaker and
your Bluetooth device.
• Turn your devices o, then on. Re-pair your speaker
and your Bluetooth device.
• Make sure that there is nothing plugged into the
AUX jack.
• Make sure that your speaker is not paired to
another Bluetooth device.
• Make sure that your speaker and Bluetooth device
are both in pairing mode.
• Make sure that your Bluetooth device supports
Bluetooth v4.0 and below.
• Make sure that your Bluetooth device is not
connected to any other device.
• Make sure that you have selected
Insignia Mini Sonic
on your Bluetooth device.
• If a passcode is needed, enter 0000.
My Bluetooth device keeps unpairing
• Shorten the distance between your speaker and
your Bluetooth device.
• If the battery on your Bluetooth device is low,
recharge the battery.
“Insignia Mini Sonic” does not appear on my
Bluetooth device
• Shorten the distance between your speaker and
your Bluetooth device.
• Put your speaker into pairing mode, then refresh
your list of Bluetooth devices. For more information,
see the documentation that came with your
Bluetooth device.
Sound is distorted
• Adjust the volume to the ¼ or ½ level.
• Adjust the volume settings on the output device
(computer or portable audio source).
• Make sure that all connections are correct and
secure.
Can my speaker connect to a TV, monitor, or DVD
player?
• Yes, if the device has a Bluetooth or an AUX
connection.
Can my speaker be connected to more than one
device (3.5mm and Bluetooth)?
• No. Only one sound source can be used at a time.
The mode priority is AUX, then Bluetooth.
Does my speaker work with smart home devices?
• Yes, your speaker works with any Bluetooth device.
LEGAL NOTICES
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, maybe cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent form that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC and Industry Canada radiation exposure
limits set forth for an uncontrolled environment.
Industry Canada Compliance IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation
is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference,
including interference that may cause undesired operation of the device.
Conformité à Industrie Canada Déclaration d'IC
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Cet équipement est conforme aux limites d'exposition aux rayonnements de
la FCC et du Canada établies pour un environnement non contrôlé.
IFETEL Statement
La operación de este equipo está sujeta a las siguientes dos condiciones: 1. es
posible que este equipo o dispositivo no cause interferencia perjudicial y 2. este
equipo debe aceptar cualquier interferencia, incluyendo la que pueda causar su
propia operación no deseada.
ICES-003
This Class B digital apparatus complies with Canadian ICES-003;
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved
Made in China
V2 ENGLISH 19-0084
NS-MINISONIC20_19-0084_QSG_V2_EN_Final.ai 2 7/1/2019 3:26:47 PM