Loading ...
Loading ...
Loading ...
Meat probe en
13
‒ When the food is ready, press to switch the
appliance off.
Changing the cooking time
You can change the cooking time at any time.
1.
Press .
2.
Use the rotary selector to change the cooking time.
3.
Then press twice.
Cancelling the cooking time
You can cancel the cooking operation time at any time.
1.
Press .
2.
Use the rotary selector to reset the cooking time to
zero.
3.
‒ To continue without setting a cooking time, press
.
The type of heating and temperature settings are
shown in the display.
10.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ In order to achieve good cooking results, do not
delay the end time once the appliance is operating.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡ The type of heating and a temperature or setting
have been set.
¡ A cooking time is set.
1.
Press .
2.
Press .
3.
To set a later end time, turn the rotary selector.
4.
Press to start the operation.
a The status bar shows a notification when the opera-
tion starts. The appliance is in standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down in the status bar.
a Once the cooking time has elapsed, an audible sig-
nal sounds. A notification appears in the status bar.
5.
Once the cooking time has elapsed:
‒ Press to silence the audible signal manually.
‒ To set another cooking time, press and use
the rotary selector to set the cooking time.
‒ To continue without setting a cooking time, press
.
‒ When the food is ready, press to switch the
appliance off.
Cancelling the end time
The set end time can only be changed when the oven
is in standby mode.
1.
Press .
a The time-setting options menu opens.
2.
Press .
3.
Use the rotary selector to reset the end time to zero.
a The appliance starts to heat and the time starts to
count down.
Changing the end time
The set end time can only be changed when the oven
is in standby mode
1.
Press .
a The time-setting options menu opens.
2.
Press " end".
3.
Turn the rotary selector to change the end time.
4.
Press to resume operation.
11 Meat probe
Cook with precision by inserting the meat probe into
the food and setting a core temperature on the appli-
ance. Once the set core temperature has been
reached in the food, the appliance automatically stops
heating.
11.1 Suitable types of heating with the meat
probe
Only certain types of heating are suitable for use with
the roasting sensor.
Once you have placed the roasting sensor in the
cooking compartment, the following types of heating
are available for you to select.
¡ 4Dhot air
¡ Top/bottom heating
¡ Hot air eco
¡ Top/bottom heating eco
¡ Circulated air grilling
¡ Pizza setting
¡ Intensive heat
11.2 Inserting the meat thermometer
Use the meat probe supplied or order a suitable meat
probe from our after-sales service.
WARNING‒Risk of electric shock!
Using the wrong meat probe could damage the insula-
tion.
▶
Only use the meat probe for this specific appliance.
ATTENTION!
Otherwise the meat probe may be damaged.
▶
Do not trap the cable of the meat probe.
▶
To prevent the meat probe from being damaged by
excessive heat, there must be a gap of a few centi-
metres between the grill element and the meat
probe. The meat may expand during the cooking
process.
1.
Insert the meat probe into the food.
The meat probe has three measuring points. Ensure
that at least the middle measuring point is inserted
in the food.
Thin
pieces
of meat
Insert the meat probe into the thickest
part of the meat from the side.
Loading ...
Loading ...
Loading ...