Loading ...
Loading ...
Loading ...
Operation Guide
25
Continued
If the “-” indicator is blinking in the gear position window while riding:
(P.109
)
Gear position indicator
Comes on when the S mode is selected in the AT MODE. (P.43)
The gear position is shown in the gear position indicator when the D, S mode or MT MODE
are selected.
The indicator may flash if:
This is normal. To operate the system again, turn the ignition switch to the OFF position
and then to the ON position again.
D indicator
Comes on when the D mode is selected in the AT MODE. (P.43)
S indicator
u “-” flashes when the engine stop switch position is changed from (Run) to (Off)
position with the ignition switch to the ON position.
u “-” flashes when the ignition switch is turned to the ON position with the engine stop switch
(Off) position.
u “-” appears for a few seconds and then goes off when the engine starts.
u The front wheel leaves the ground.
u You turn the wheel while the motorcycle is upright on the stand.
Loading ...
Loading ...
Loading ...