Loading ...
Loading ...
Loading ...
9
Reversing The Door SwingReversing
RECOMMENDATIONS
1) WARNING Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of
obstruction.
2) WARNING Do not damage the refrigerant circuit.
3) WARNING Do not use electrical appliances inside the food storage compartments of the appliance,
unless they are of the type recommended by the manufacturer.
4) The appliance has to be unplugged after use and before carrying out user maintenance on the
appliance.
5) This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
6) Children should be supervised to ensure that they do not play with the appliance.
7) If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
8) Please abandon the refrigerator-freezer according to local regulators for it use flammable blowing gas
and refrigerant.
9Please according to local regulations regarding disposal of the appliance for its flammable refrigerant
and blowing gas. Before you scrap the appliance, please take off the doors to prevent children trapped.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household
wastes throughout the EU.
To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse
of material resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
Remove the two screws from top bracket and replace
on the otherside.You will need to first remove the
plastic caps from the other side.
Slide the Appliancedoor back on to the Top hinge,
making sure its the right way up.
Screw the bottom hinge into place on the new side.
Replace theother foot on the other side.Replace the
plastic covering by clicking back into position on the
door hinge.
Check that the door is
aligned horizontally and
vertically and that the seals
are closed on all sides
before finally tightening the
bottom hinge.
Re-adjust the levelling feet.
Loading ...