Loading ...
Loading ...
Loading ...
Using the appliance
1 Make sure the AirFloss is switched on (Fig. 9).
2 Place the tip between the teeth and apply gentle pressure.
Slightly close your lips over the nozzle when it is in place,
to avoid splashing (Fig. 11).
Tip: Use your nger to press the activation button.
Note: The AirFloss is intended to be used on the front/outside surface of
the teeth only.
3 Press the activation button to deliver a single burst of air and
micro-droplets of mouthwash or water between the teeth.
Alternatively, hold the activation button to deliver continuous
bursts of mouthwash or water approximately every 1 second
(select models) (Fig. 12).
4 Slide the guidance tip along the gum line until you feel it settle
between the next two teeth.
5 Continue this procedure for all spaces including behind your
back teeth (Fig. 13).
6 To switch off the AirFloss, press the on/off button again.
Automatic shut-off function
The automatic shut-off function automatically switches off the AirFloss if it
has not been used for 4 minutes.
Cleaning
Do not clean the nozzle, handle or charger in the dishwasher.
Do not use cleaning agents to clean the appliance.
ENGLISH10
Loading ...
Loading ...
Loading ...