Loading ...
Loading ...
Loading ...
PAGE 16
1 . Make the electrical connections, taking the electrical cable previously put thru the
knock out hole. Connect the white and black wires of the power supply cable wire to the
white and black wires in the remote blower wiring box with twist-on connector. Connect
the green power supply ground wire to the green ground screw.
2. Place the wire box cover back on the wirebox with the provided screws.
3. Reinstall the exterior remote blower box housing back onto the blower with provided
screws.
4. Refer to your hood manual for finishing electrical connections.
You can be killed or seriously injured if you don’t follow
instructions.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE THE FOLLOWING:
• Disconnect power before making electrical connection.
• Connect the ground wire to green ground screw in wiring box.
Failure to do so can result in death or electrical shock
WARNING
Electrical Connections
FIGURE 10
Loading ...
Loading ...
Loading ...