Loading ...
Loading ...
Loading ...
• Slow pour spout
• Rapid boiling
• MAX water level indicator
• Steam control to switch
the kettle off after boiling
• Neon light to notify when kettle is boiling
• Automatically shuts off for boil-dry protection
• Easy seat 360° rotational power base
• Stainless steel kettle body
• Vented lid for smooth safe slow pour
• Vented lid to insert thermostat probe if desired,
which requires inserting the probe at an angle
towards the center of kettle
Before rst use, it is recommended that you ll to the maximum level mark with fresh water,
boil and empty the kettle at least 3 times to clear kettle of any tiny particles. Do not drink the water.
1. Open the lid.
2. Fill the kettle with desired amount of water (no less than the 1 cup and no more than the 4 cups).
Close lid with vent holes of lid always facing handle.
3. Connect the plug into a power outlet (110-120V AC); switch the kettle on by pressing the switch.
The neon light will illuminate to indicate the kettle is heating.
4. The kettle will automatically switch off once the water has boiled and the neon light goes off.
5. Pour out water and repeat process.
6. After nal rinse let kettle body cool.
TO BOIL WATER
1. Remove kettle from unplugged power base.
2. Remove lid.
3. Fill with water, but no more than MAX water level indicator.
4. Press lid on so that it seals.
5. Always have vent holes of lid facing handle.
6. Place on the 360° power base.
7. Plug into appropriate outlet.
8. Press power switch downward and neon light will appear.
9. When water has boiled it will automatically switch off and neon light will turn off.
10. Lift kettle and pour water slowly into desired vessel.
11. Replace kettle onto power base.
12. Always check MAX water level indicator before boiling water.
IF KETTLE BOILS DRY
1. The Automatic Boil-Dry protection will activate and shut off the kettle when there is no water to boil.
2. Remove kettle from power base and set on at counter with the lid removed.
3. After 10 minutes rell kettle with cold water up to MAX water level.
4. Replace lid and put on power base and push switch to heat water.
FEATURES
OPERATING INSTRUCTIONS
Loading ...