Loading ...
Loading ...
Loading ...
32
EN
Press MENU/OK > [Answer machine] >
[HS screening] > [On]/[O], then press
MENU/OK to conrm.
When the call screening function is
activated, you can:
• press REDIAL/C to stop listening
to the caller. Press REDIAL/C to
listen to the caller again.
• press / to adjust the
speaker volume during call
screening.
Set the ring delay
You can set the number of times the
phone rings before the answering
machine picks up the call.
1
Press / or MENU/OK > [Answer
machine].
2
Select [Ring delay], then press
MENU/OK to conrm.
3
Select a new setting, then press
MENU/OK to conrm.
» The setting is saved.
Note
• Make sure that the answering machine is
switched on before this feature can be
applied.
Tip
• When you access the answering machine
remotely, you are recommended to set
the ring delay to [Toll saver] mode. This
is a cost eective way to manage your
messages. When there are new messages,
the answering machine picks up the call after
3 rings; When there is no messages, it picks
up the call after 5 rings.
Remote access
You can operate your answering
machine when you are away from
home. Simply make a call to your
phone with a touch tone phone and
enter your 4-digit PIN code.
Note
• The remote access PIN code is the same as
your system PIN. The preset PIN is 0000.
Activate/deactivate the remote
access
You can allow or block remote access
to the answering machine.
1
Press / or MENU/OK > [Answer
machine].
2
Select [Remote access], then press
MENU/OK to conrm.
3
Select [Activate]/[Deactivate], then
press MENU/OK to conrm.
» The setting is saved.
Change the PIN/passcode
1
Press / or MENU/OK > [Answer
machine].
2
Select [Remote access] > [Change
PIN], then press MENU/OK to
conrm.
3
Enter the old PIN/passcode, then
press MENU/OK to conrm.
4
Enter the new PIN/passcode, then
press MENU/OK to conrm.
5
Enter the new PIN/passcode again,
then press MENU/OK to conrm.
» The setting is saved.
Loading ...
Loading ...
Loading ...