Loading ...
Loading ...
Loading ...
9EN
2 For MP3 tracks, press ALBUM/PRESET /
to select an album.
3 Press / to select a track, and then
press PROGRAM to conrm.
4 Repeat steps 2-3 to program more tracks.
5 Press to play the programmed tracks.
• To erase the program, stop play, and
then press
.
Play from Bluetooth-enabled devices
Note
•
Before pairing a device with this unit, read its user
manual for Bluetooth compatibility.
• Compatibility with all Bluetooth devices is not
guaranteed.
• Any obstacle between the unit and the device can
reduce the operational range.
• The effective operational range between this unit
and your Bluetooth enabled device is approximately
10 meters (30 feet).
• The unit can memorize up to two previously connected
Bluetooth devices.
To enjoy music through the speaker wirelessly,
you need to pair your Bluetooth enabled device
with the unit.
Philips BM60 xxx
1 Press /PAIRING to select the Bluetooth
source.
» [BT] (Bluetooth) is displayed.
» The Bluetooth indicator ashes blue.
2 On your device that supports Advanced
Audio Distribution Prole (A2DP), enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3 Select 'Philips BM60 xxx' on your
Bluetooth enabled device and if necessary
input '0000' as the pairing password.
» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the unit beeps.
» 'BT' is displayed.
4 Play music on the connected device.
» Music streams from your Bluetooth
enabled device to this unit.
• If you fail to search for 'Philips
BM60 xxx' or cannot pair with this
unit, press and hold
/PAIRING for
three seconds until you hear a beep
sound to enter pairing mode.
To disconnect the current Bluetooth-enabled
device:
• Deactivate Bluetooth on your device.
Listen to the radio
Tip
•
Position the antenna as far as possible from TV or other
radiation sources.
• Make sure that you have connected the supplied FM
antenna.
• For optimal reception, fully extend and adjust the
position of the antenna.
Tune to a radio station
1 Press FM/AUDIO IN repeatedly to select
the tuner source.
2 Press and hold / for three seconds.
» The radio tunes to a station with
strong reception automatically.
Loading ...
Loading ...
Loading ...