Loading ...
Loading ...
Loading ...
9.8 CUTTING TIPS
• Tilt the machine toward the area to be cut. Use the tip of
the cutting line to cut grass.
•
Move the machine from right to left to prevent thrown
debris from hitting the operator.
• Do not cut in the danger area.
• Do not force the trimmer head into uncut grass.
• Wire and picket fences cause cutting line wear and
breakage. Stone and brick walls, curbs, and wood can
wear the cutting line quickly.
Direction
of rotation
Best cutting area
Dangerous
cutting area
10 MAINTENANCE
IMPOR
TANT
Read and understand the safety regulations and the
maintenance instructions before you clean, repair or do the
maintenance work on the machine.
IMPOR
TANT
Make sure that all nuts, bolts and screws are tight. Examine
regularly that you install the handles tightly
.
IMPOR
TANT
Use only the replacement parts and accessories of the initial
manufacturer
.
10.1 GENERAL INFORMATION
IMPORTANT
Only your dealer or approved service center can perform
maintenance that is not given in this manual.
Before the maintenance operations:
•
Stop the machine.
• Remove the battery pack.
• Cool the motor.
• Store the machine in cool and dry place.
• Use correct clothing, protective gloves and safety glasses.
10.2 CLEAN THE MACHINE
• Clean the machine after use with a moist cloth dipped in
neutral deter
gent.
• Do not use aggressive detergents or solvents to clean the
plastic parts or handles.
• Keep the trimmer head free of grass, leaves, or excessive
grease.
• Keep the air vents clean and free of debris to avoid
overheating and damage to the motor or the battery.
• Do not spray water onto the motor and electrical
components.
10.3 REMOVE EXCESS LINE
1. Push the tabs (a) on the sides of the trimmer head at the
same time.
a
2. Pull and remove the spool cover (b).
10
English
EN
Loading ...
Loading ...
Loading ...