Loading ...
Loading ...
Loading ...
5
ENGLISH
4 Functional overview (fig. A)
PP HHIILL IIPP SS
• Lights up when a 5V device is charging (when no
device is connected, the PHILIPS logo will flash).
• Flashes when the device is fully charged.
FFoollddaabbllee ppoowweerr pplluugg
Connects to the wall outlet.
UUSSBB ppoorrtt
Connects to 5V DC devices (mobile telephones,
MP3 players, etc.).
5 Operation
CChhaarrggiinngg ddeevviicceess -- pprreeppaarraattiioonn
Check the maximum input voltage (V DC) of the
device you wish to connect. For this see the user
manual that came with the device.
Make sure the device does not consume more current
(mA) than 350 mA.
Check what connector tip is required for your device.
See the compatibility sheet for the proper tip for your
device.
CChhaarrggiinngg 55VV ddeevviicceess
(fig. B)
Insert the plug of the USB cable into the USB port (3).
Connect the connector tip to the USB cable.
Insert the connector tip into the power supply jack of
the device.
>
PP HHII LLII PPSS
lights up when a device is charging.
>
PP HHII LLII PPSS
will flash when the device is fully charged.
Disconnect the device from the USB charger.
Disconnect all cables from the device and from the
USB charger.
6 Technical specifications
• Rated input: 100V - 240V AC (50/60Hz), 0.2A
• Rated output: 5.4V, 350 mA
• Operating temperature: -10ºC - 40ºC
• Size: 70.3 x 55.5 x 35.5 mm (h x w x d)
• Weight: 70 g
• Maximum battery capacity for charging is 1,200mAh,
battery type is Li-Ion or Lithium Polymer
• Power consumption:
- in Off mode: 0 W;
- in Standby mode: 0.25 W.
7 Troubleshooting
PPrroobblleemm
– Possible cause
• Solution
UUSSBB cchhaarrggeerr ddooeess nnoott cchhaarrggee ccoonnnneecctteedd ddeevviiccee
– Voltage of device does not correspond with that of USB
charger.
• Refer to the user manual that came with the device.
– Improper connection between device and USB charger.
• Make sure that the USB cable is properly inserted into
the device and the USB charger.
– Damaged USB cable or connector tip.
• Replace USB cable and/or connector tip.
– Wrong connector tip used.
• Check connector tip and replace if necessary.
– Non supplied USB cable / connector tip used.
• Replace with supplied USB cable/connector tip.
– Problems with electrical circuit of USB charger.
• Take the USB charger to your local distributor.
55
44
33
22
11
33
22
11
3
2
1
SCM4480_27 05-03-2008 15:44 Pagina 5
Loading ...
Loading ...
Loading ...