Loading ...
Loading ...
Loading ...
4
• make sure that the paper bag and the bag base are correctly positioned before closing the lid (10).
b) If your vacuum cleaner is equipped with a cloth bag*:
• remove the bag base (6) from the bag compartment (3) - fig. 15, and then remove the cloth bag (8) from its
base (6) by sliding it on the runners - fig. 16;
• open the bag using the retaining clip - fig. 20, and then empty it over a dustbin - fig. 21;
• clean the bag in clean water - fig. 22;
• leave it to dry for at least 24 hours (only refit the bag when it is completely dry);
• close the cloth bag: make sure that the retaining clip is correctly repositioned before refitting the bag in the ap-
pliance;
• reposition the cloth bag on the bag base - fig. 18, and then using the bag base runner (5), place it inside the
compartment - fig. 19;
• make sure that the cloth bag and the bag base are correctly positioned before closing the lid (10).
Changing the microfilter (4)
Important: change the microfilter every six months
• Remove the flexible pipe (27) from the suction inlet (11) - fig. 2.
• Open the lid (10) of your vacuum cleaner - fig.14.
• Remove the bag from the bag compartment - fig.15.
• Remove the microfilter - fig. 23 and throw it in the dustbin - fig. 24.
• Put a new microfilter in its housing - fig. 25.
• Reposition the bag inside the compartment - fig.19.
• Make sure that the bag and the bag base are correctly positioned before closing the lid (10).
Clean the air outlet foam filter (19)
Important: clean the air outlet foam filter every 6 months
• Remove the air outlet grill (20) positioned behind the appliance - fig. 26.
• Remove the air outlet foam filter (19), wash it in clean water - fig. 27, and leave it to dry for 24 hours.
• Refit the air outlet foam filter (19) in its housing and close the air outlet grill (20) - fig. 28.
Cleaning the vacuum cleaner
• Wipe the body of the vacuum cleaner and accessories with a soft damp cloth, then dry.
• Wipe the lid with a dry cloth.
• Do not use detergents or any corrosive or abrasive products.
Important: If you notice that your vacuum cleaner is not operating as well, before carrying out any checks,
switch it off using the ON/OFF pedal.
Repairs should only be performed by specialists using original spare parts.
If your vacuum cleaner does not function
The appliance is not plugged in: check that the appliance is plugged in correctly.
If your vacuum cleaner has no suction
• An accessory or hose is blocked: unblock the accessory or the hose.
• The vacuum lid is not closed properly: check the position of the bag and close the lid again.
6. REPAIR SERVICE
* Model dependent: these parts are specific to certain models or they are accessories that can be purchased separately.
TE_TW22_903690-02_micro-space_903690/02 10/03/15 14:10 Page4
Loading ...
Loading ...
Loading ...