Loading ...
©2017 Sonance. All rights reserved. Sonance and Architectural Series are registered trademarks of Dana Innovations. Due to continuous product improvement,
all features and specications are subject to change without notice. For the latest Sonance product specication information visit our website: www.sonance.com
SONANCE • 991 Calle Amanecer • San Clemente, CA 92673 USA • PHONE: (949) 492-7777 • FAX: (949) 361-5151 • Technical Support: (949) 492-7777
10.24.17
The BPS6 TL ships with a foam plug and tether inserted
into the end of the port tube; remove and discard.
Guide the port tube onto the 90 degree connector so
the tube is positioned snugly in place. Tighten the clamp
ring to secure the port tube.
(See Figure 5).
Attach the mounting platform to the stud or joist.
For mounting platform installation details visit
www.sonance.com/in-wall-in-ceiling/
architectural-series/bps6-tl.
BPS6 TL QUICKSTART GUIDE FOR USE WITH ARCHITECTURAL SERIES BANDPASS CONNECTORS
Attach the four conductor speaker wire to the input
terminals; positive wires to red terminals and negative
wires to black terminals. Run a signal test using an
amplied program material for at least 60 seconds.
Secure the speaker wire to the zip tie attached to the
subwoofer cabinet to prevent accidental removal.
(See Figure 6).
For more eManuals and diagrams visit
www.sonance.com/in-wall-in-ceiling/bps6-tl
33-7939
5
LEFT
BPS6TL
RIGHT
MADE IN CHINA
6
Included
zip tie
for wire
Figure 5
Figure 6