Loading ...
Loading ...
Loading ...
47
USING THE SELECTORS
A
. PROGRAMME/TEMPERATURE SELECTOR
To select the desired washing temperature/programme, turn
this selector until the number or symbol for the programme
desired is opposite the guide mark (p). Temperature
selection depends on the programme selected.
For programme selection, see the table of programmes/
temperatures (P) on the panel.
To modify settings or change programmes once the
programme has started,
proceed as follows:
- Press the start/pause button until the pilot light showing
the end of the program phase cicle lights up.
- Release the button. After a few seconds the lamp on
the display will go out.
- Select the desired programme.
- Hold down On/Pause again until one of the lamps on
the programme phase display lights up.
- The machine will then run through the new programme
selected.
To
add more clothes during a programme, proceed
as follows:
- Hold down On/Pause until one of the lamps on the
programme phase display flashes.
- Wait until the Door Secure indicator goes out, open
the door and add more clothes to the wash.
- Close the drum door and the outer cover tight.
- Press On/Pause.
T. Temperature Display
This displays the temperature for the programme
selected.
t. Programme phase display
This displays the current phase throughout the pro-
gramme selected.
PRELAVAGE
LAVAGE
RINÇAGES
ESSORAGE FINAL
STOP - FIN DE PROGRAMME
START
Loading ...
Loading ...
Loading ...