Loading ...
Loading ...
Loading ...
Crease attachment
• Remove the fabric brush. Completely slide the
hook of the accessory into the slot located in the
lower part of the steam head.
• Push on the handle to open the crease attach-
ment.
• Place the garment between the crease attach-
ment and steam head.
• Release the handle.
• Starting at the top of the garment, move the crease attachment in a downwards motion.
• Once unit is unplugged and completely cooled down, remove the crease attachment
by sliding it off of the steam head.
Lint pad
• The lint pad removes hair, lint and animal fur for a professional finish.
• To use the lint pad, slowly brush the clothing with the grain or nap of the fabric.
• The pad can be cleaned by brushing it in the opposite direction. We recommend clea-
ning the pad on an old cloth that can be discarded.
AFTER USE
• After using the garment steamer, switch off the appliance by pressing the pedal once
again. The power indicator light will go off, and you can then unplug the appliance.
• Hang the steam head in an upright position on the hook when not in use.
• Empty and rinse the water tank each time before storage in order to flush out any scale
particles. (fig.15)
• Loosely wind up the electrical cord and close with the Velcro strip, then hang it from the
clip on the handle. (fig.16a, 16b)
• Do not carry the steamer by the water tank handle. This appliance includes luggage
style wheels for added convenience when transporting.
TRANSPORT
• Your appliance is fitted with two wheels for ease of transport. Tilt the appliance towards
the rear holding the handle and then pull along to transport.
• You can also lift up the appliance in order to transport it, again holding the appliance by
the handle.
CLEANING
• Clean the main unit with a damp cloth.
• To maintain maximum performance, your steamer must be descaled occasionally. The
time between descaling operations depends on the quality of the water and the fre-
The lint pad is a separate accessory and cannot be attached to the steam head.You
can use the lint pad independently from the steamer.
Warning: Never touch the head until it has cooled down completely.
Do not attempt to lift up or transport the device holding the pedal, the water tank
handle or the built-in hanger.
15
9100021246-01 IS6200 M2-D2.qxp_110X154 08/07/2016 10:38 Page15
Loading ...
Loading ...
Loading ...