Loading ...
Loading ...
Loading ...
COOK
The Cook feature makes cooking your favorite foods
easy. By actually sensing the steam that escapes as
food cooks, this feature automatically adjusts the
oven’s cooking time to various types and amounts
of food.
Because most cooking containers must be covered
during Cook, this feature is best with foods that you
want to steam or retain moisture.
Foods Recommended Foods Not Recommended
A wide variety of foods including meats, fish and
vegetables can be cooked using this feature.
Foods that must be cooked uncovered, foods that
require constant attention, foods that require addition of
ingredients during cooking and foods calling for a dry
look or crisp surface after cooking should not be cooked
using this feature. It is best to Micro Cook them.
Cook Codes
Cook codes 1 through 7 are designed to give you easy, automatic results
with a number of popular foods. See the Sensor Cooking Control Guide
section for specific foods and instructions.
Example:
Step 1: Place covered food
in oven. Touch COOK pad.
‘‘ENTER FOOD CODE’’
flashes on display.
Step 2: Touch number pad of desired food code. The
code and food type you selected will appear on the
display. “FOOD” and “CODE” flash. After 5 seconds,
“START” flashes on the display. Touch START.
The word ‘‘AUTO’’ shows
on display, indicating
steam sensor is activated.
DO NOT OPEN DOOR.
OPENING DOOR MAY
AFFECT COOKING
PERFORMANCE.
Beep sounds when steam is
sensed and ‘‘AUTO’’ is
replaced by cook time.
Rotate or stir food, if
necessary. When done,
oven beeps every minute
until door is opened or CLEAR/OFF is touched.
POWER
TIME
COOK
CODE
FOOD
COOK
Easy to Use Keep Door Closed
Simply touch 3 control pads—COOK, desired CODE
and START. The word ‘‘AUTO’’ appears on the
display and the sensor is activated to sense steam
from food.
Do not open the oven door while the word ‘‘AUTO’’
is displayed—steam escaping from the oven can
affect cooking performance. If the door is opened,
close the door and touch START immediately.
18
Loading ...
Loading ...
Loading ...