Loading ...
Loading ...
Loading ...
10 49-80835-1
Bluetooth
®
Pairing
Precision Cooking
Pairing a Bluetooth
®
Device
Hold the Precision Cooking pad for 3 seconds until
display reads “Add” and
is blinking. Tap to initiate
pairing mode on the unit, then activate your device to
initiate the device’s pairing mode. Refer to the table
below for device specific instructions.
When
stops blinking,
device has been added.
Repeat this step for each
additional device. Up to 5
devices will be stored in
memory. To exit Pairing,
touch Precision Cooking
pad one time, or menu will
automatically exit after 60
seconds of no user input.
The Precision Cooking feature allows precise temperature control of certain cooking devices for improved results.
Initiating a Precision Cooking Mode
1. Touch the Precision Cooking pad.
2. Any burner available for Precision Cooking will flash.
This excludes any burner on in standard mode. If no
Precision Cooking devices are paired, no burners
will flash as available. NOTE: Only one burner may
run a Precision Cooking mode at a time. If another
precision mode is attempted, the burner in use for
Precision Cooking will flash.
3. The display will read “SEL”, instructing you to select a
burner to use.
4. Touch the On/Off pad for the desired burner, or press
Sync Burners to use Precision Cooking across the
two left burners.
Removing Bluetooth
®
Devices
Hold the Precision Cooking pad for 3 seconds until
display reads “Add” and is blinking. Tap so that
display shows “dEL”, then tap to delete all paired
devices. The icon will turn off when complete.
NOTE: Your unit cannot delete a single, or specific
device. After all devices are cleared, devices you wish to
use must be paired again.
USING THE COOKTOP: Bluetooth
®
Pairing / Precision Cooking
Supported Devices How to Initiate Pairing
Hestan Cue fry pan Tap pan handle
Hestan Cue pot Tap pot handle
Precision Probe Press side button once
Loading ...
Loading ...
Loading ...